| Blade Action | : | CCW |
| Electrical Connections | : | 2-Wire |
| Motor Type | : | MSS Spring Return Synchronous |
| Series | : | ZDS |
| Shape | : | Rectangular |
| Size | : | 18 x 14 in |
| Type | : | Side Mount |
| Voltage Rating | : | 24 VAC |
The ZDS have a minimum position setting that allow the damper to remain open to a pre-set position instead of closing off fully. This minimum position provide for a small amount of air to be bypassed through the damper to lessen the need for a separate bypass damper and provide continual air circulation. To set the minimum position, set when there is no power to the damper and it is in the open position. Loosen the long minimum position set screw and move to a desired setting shown on the minimum position label and re-tighten. When the damper is powered closed the minimum position screw will stop the damper at the position set.
Zonefirst® Zone Damper, Side Mount, Series: ZDS, 18 x 14 in Size, Rectangular Shape, 24 VAC, CCW Blade Action, MSS Spring Return Synchronous Motor, 2-Wire Electrical Connections
- Two wire, 24 V power close spring return zone damper