| Color | : | Clear |
| Composition | : | Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed |
| Container Size | : | 16 oz |
| Curing Time | : | 2 hr |
| Odor/Scent | : | Solvent |
| Setting Time | : | 3 to 4 min |
| Suitable For Use With | : | Upto 6 in Dia PVC Pipe and Fittings |
| Temperature Rating | : | -15 to 110 deg F |
| Type | : | All Weather Low VOC Medium Body |
Oatey® PVC All Weather Medium Bodied Fast Set Clear Cement is recommended for potable water, drain, waste and vent applications. It is formulated to perform in all weather conditions from -15°F to 110°F and applies easily with included in-lid dauber. This clear, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey® PVC Cement, All Weather Low VOC Medium Body, 16 oz Container, For Use With: Upto 6 in Dia PVC Pipe and Fittings, Clear, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, 3 to 4 min Setting, 2 hr Curing, -15 to 110 deg F
- Medium bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit
- Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
- No primer needed on non-pressure DWV applications, where local codes permit
- 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength
- 7.89 +/- 0.2 lbs./gallon density
- 3 to 4 min at 30 to 50 deg F/3 min at 50 to 70 deg F/2 min at 70 to 90 deg F setting
