This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc.
| Color | : | White |
| Current/Amps | : | 0.37 A |
| Duct Diameter | : | 4 in |
| Flow Rate | : | 80 cfm |
| Frequency Rating | : | 60 Hz |
| Grille Length | : | 11-3/8 in |
| Grille Material | : | Polymer |
| Grille Width | : | 12 in |
| Housing Height | : | 5-3/4 in |
| Housing Length | : | 9-1/4 in |
| Housing Material | : | Galvanized Steel |
| Housing Width | : | 10 in |
| Humidity Sensing | : | No |
| Motion Sensing | : | No |
| Mounting Type | : | Ceiling/Room-Side |
| Series | : | InVent™ |
| Sones | : | 2 sones |
| Type | : | Single Speed |
| Voltage Rating | : | 120 VAC |
| Wattage Consumption | : | 43.1 W |
NuTone® Bath Ventilation Fan, Single Speed, Series: InVent™, 80 cfm Flow Rate, 4 in Diameter Duct, 120 VAC, 0.37 A Current/Amps, 60 Hz Frequency, 43.1 W Wattage Consumption, 2 sones, 11-3/8 in Grille Length, 12 in Grille Width, Polymer Grille, 9-1/4 in Housing Length, 10 in Housing Width, 5-3/4 in Housing Height, Galvanized Steel Housing Material, Ceiling/Room-Side Mounting, No Humidity Sensing, No Motion Sensing, White
- 80 CFM reduces humidity to quickly eliminate fogged mirrors and manage moisture in bathrooms up to 75 sq-ft, so your vision will always be clear and your surroundings will always be comfortable
- Retrofit installations can be done entirely from the room side no attic access required, this means a faster, easier installation, so you can move on to something else
- With our TrueSeal™ damper technology, InVent™ fans reduce air leakage by up to 50% compared to competitive models, resulting in better home performance via blower door tests and reducing cold and warm air backdrafts
- EzDuct™ connector can be installed room-side with no attic access required, fan housing connection have never been easier
- UL Listed for use over tubs and showers with a GFCI circuit, so you can capture the steam before it spreads throughout the room by locating your fan exactly where you need it the most
- Plug-in, permanently lubricated motor engineered for continuous operation
- Dynamically balanced centrifugal bowler wheel for quite efficient performance
- Low RPM for quiet operation
- Polymeric, 4 in duct connector with tapered sleeve and no metallic clatter
- 5-3/4 in height allows for 2 x 6 in ceiling installations
- Sturdy, easy, four-point mounting directly to joist
- Can be mounted in ceilings up to 7/12 pitch
- Horizontal duct direction
- 80 CFM at 0.1 in/67 CFM at 0.25 in flow rate
