| Applicable Materials | : | Exterior Sheeting, Masonry, Concrete and Wood Walls |
| Color | : | Amber |
| Composition | : | 20 to 40% DiphenylmethanediIsocyanate, Isomers and Homologues, 10 to 20% 4,4'-Methylenediphenyl DiIsocyanate, 10 to 20% Tris(2-Chlorisopropyl)-Phosphate, 5 to 10% Dimethylether, 1 to 5% Isobutane, Propane |
| Container Size | : | 12 oz |
| Container Type | : | Can |
| Drying Time | : | 4 hr |
| Flash Point | : | -155 deg F |
| Form | : | Aerosal Spray |
| Odor/Scent | : | Light Petroleum |
| Temperature Rating | : | 240 deg F |
| VOC Content | : | 155 g/L |
Nu-Foam® is an expanding, polyurethane, prepolymer foam that is used as a sealant and an insulating product. It is designed to seal, fill and insulate small cracks, gaps and voids. Tack free time for Nu-Foam® is less than 30 minutes at 70 deg F and 40 to 50 percent relative humidity. Its R-Value is 4.9 per inch thick making a very good insulator in most any application and can even provide sound-deadening. Nu-Foam is UL classified and is fire retardant. Can withstand temperatures up to 240 deg F.
Nu-Calgon Nu-Foam® Expanding and Insulating Sealant, Can Container, 12 oz Container, Composition: 20 to 40% DiphenylmethanediIsocyanate, Isomers and Homologues, 10 to 20% 4,4'-Methylenediphenyl DiIsocyanate, 10 to 20% Tris(2-Chlorisopropyl)-Phosphate, 5 to 10% Dimethylether, 1 to 5% Isobutane, Propane, Aerosal Spray Form, 4 hr Drying, Amber, Light Petroleum Odor/Scent, 240 deg F, -155 deg F Flash Point, 155 g/L VOC, Applicable Materials: Exterior Sheeting, Masonry, Concrete and Wood Walls
- Yields 352 linear feet (medium can) and 780 linear feet (large can) of 3/8 in bead
- Tack-free in 30 minutes and dries in 4 hours
- Insulates against heat loss and heat gain
- Fire retardant
- 2 years shelf life
- No CFC's, no HCFC's
- Density is 1.75 +/- 0.25 pounds per cubic foot
- Water vapor transmission in 10 perm inches
- Flame spread ASTM 84 - 10
- Smoke density ASTM - 15