| Connection Type | : | 3/8 in Solder |
| Diameter | : | 3.09 in |
| Domestic/Import | : | Import |
| Finish | : | Nickel Plated |
| Overall Length | : | 6.31 in |
| Pressure Rating | : | 600 psig |
| Type | : | Bi-Flow |
The Mars® Bi-Flow Heat Pump Driers are designed to provide complete protection to the heat pump or reverse cycle system. The molded block core exposes maximum surface area for efficient filtration and retention of solid contaminants. The internal check valves prevent the release of collected contaminants when the heat pump cycles from the heating to cooling modes. The use of molecular sieve and activated alumina in the desiccant core block provide the heat pump drier maximum moisture and acid removal. The addition of charcoal to the desiccant core allows for the removal of wax that may occur at low evaporator temperatures, giving protection to your expansion device.
Mars® Heat Pump Drier, Bi-Flow, 3/8 in Solder, 3.09 in Dia, 6.31 in Overall Length, 600 psig, Nickel Plated, Import
- For use on R134A, R12, R22, R500, R404A, R410A, R507
- High organic & inorganic acid removal
- Solid block desiccant core
- Proven, nylon internal check valves
- High moisture removal
- Corrosion resistant paint
- Minimum burst pressure 2500 psig
- 7.5 ton R22/R410 flow capacity at 1 psi
- For use with all CFC, HCFC and HFC refrigerants