This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc.
| Color | : | Red/Blue/Yellow |
| Domestic/Import | : | Domestic |
| Length | : | 60 in |
| Material | : | Kevlar® |
| Nominal Size | : | 1/4 in |
| Series | : | CLS |
| Type | : | 3-Piece |
| Working Pressure | : | 800 psi |
CLS Series hoses feature a secure seal fitting that opens to full flow. The revolutionary patent-pending design on our internal structure significantly reduces blowouts, provides maximum flow and automatically traps refrigerant discharge in the hose. JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts. Pressure rating 800 psi and 4,000 psi burst. These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia. As always, Kobra® hoses are made in the USA.
JB Industries Kobra® High Pressure Manifold Hose Set, 3-Piece, Series: CLS, 1/4 in Nominal, 60 in Length, 800 psi Working, Kevlar®, Red/Blue/Yellow, Domestic
- Gasket feature a hood with a straight edges that snaps into the straight edges of the barb and straight edges to straight edges force eliminate gasket blowouts
- Depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts
- Kobra® high pressure hoses are made from Kevlar®, the same material that stops bullets in bullet-proof vests
- Kevlar® makes our hoses incredibly strong and flexible, Kobra® hoses feature a nitrile cover which is better than neoprene because it is more resistant to oils, giving the hoses a longer life
- 800 psi working, 4000 psi burst pressure
- 5 to 1 safety factory (beat industry standard of 4 to 1)
- Use rebuild kit 33112RK, P90022 replacement O-ring
- Stainless steel thrust washer insures free rotation even under high pressure
- Three points contacts on depressor
- JB also uses a common crimp that grips the full circumference of the hoses yielding a maximum hold and uniform seals that prevents leaks and burst
- Suitable for R-410A refrigerants
- Low loss fitting adapter available