Flaretite® BP45FT-04CU-SPP
Flaretite® 97221 Seal Kit, For Use With 45 deg SAE Flared, Refrigeration and Gas Fittings, Aluminum and Brass Fittings, 14 to 18 ft-lb Torque, Copper, Purple, Domestic
| Color | : | Purple |
| Domestic/Import | : | Domestic |
| Material | : | Copper |
| Specifications | : | 14 to 18 ft-lb Torque |
| Suitable For Use With | : | 45 deg SAE Flared, Refrigeration and Gas Fittings, Aluminum and Brass Fittings |
Your Ultimate Solution for eliminating leaks, Evolving higher pressure and more demanding hydraulic systems expose the metal to metal flare fitting which makes it very difficult to obtain a permanent leak free flared fitting joint. Flared Fitting Leaks are most commonly caused by misalignment, surface damage and vibration in the field. The entire seal is coated with a dry-to-the-touch, baked-on Loctite™ sealant. When inserted into a 45 deg SAE fitting, the concentric rings form multiple seals down the face of the flare, while the Loctite coating fills minor imperfections, dramatically increasing the integrity of the fitting. New ISO and NFPA standards strongly recommend seals for all fittings. The result is the Flaretite Seal is a permanent, "Leak-Free" connection, which exceeds the performance of today's ORFS fittings and at significantly lower cost. Our seal maintains the low profile, versatility and world-wide availability of flared fittings. Flared connections fitted with Flaretite® Seals are today's answer to low cost, high integrity, "Zero-Leak" fittings, while complying with new international standards. This unique seal may be fitted to 45 deg SAE, refrigeration and gas fittings. The introduction of the Flaretite Seal eliminates the weakness in the original flare design.
Flaretite® Seal Kit, For Use With: 45 deg SAE Flared, Refrigeration and Gas Fittings, Aluminum and Brass Fittings, Specifications: 14 to 18 ft-lb Torque, Copper, Purple, Domestic
- 45 deg copper stamping with Loctite™ coating
- Locking tabs clip seal securely on fitting
- Conical rings for multiple points of contact
- Rated for -40 to 300 deg F
- Pressure rated up to 10000 psi
- Used to prevent leaks that are caused by galling, vibration, pulsation and extreme temp changes
- A perfect solution for a leak-free connection in today's harshest environments
