Duro Dyne® RS156

The Rapit® is an inexpensive, rattle-free regulator for quick installation on balance or splitter dampers. It is formed from rust-resistant, heavy gauge, galvanized steel and installs in seconds. The Rapit® will penetrate and secure to round or rectangular damper blades up to 24 ga steel. It has a fully retractable bearing of zinc alloy, threaded to accept a 5/16-18 wing nut and a handle that indicates the damper position.

Duro Dyne® Rapit® Regulator Set, Steel, Galvanized, Domestic

• Slip the bearing over the edge of the damper at the bearing line
• Lay the assembly on any firm surface and rap the prong with a hammer
• One blow drives the prong through the damper blade, holding it securely to the damper
• When hit with a hammer, the prong will automatically form up tight by the anvil, which is built into the bottom of the Rapit® bearing

• Duro Dyne 2002 Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Duro_Dyne_2002_Catalog.pdf
• Duro Dyne 8085 Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Duro_Dyne_8085_Specification_Sheet.pdf