| Eye Size | : | 1-1/2 in |
| Length | : | 15 ft |
| Wire Rope Diameter | : | 3/32 in |
The Looped Cable Assembly enhances the Dyna-Tite suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the jobsite. The remaining wire rope "drop" is passed through a channel in the Dyna-Tite Cable Lock. Then, the wire rope is either wrapped around the ductwork or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the ductwork in place. To ensure maximum safety, use only looped wire rope supplied by Duro Dyne with Dyna-Tite cable locks.
Duro Dyne® Dyna-Tite® Looped Cable Assembly, 3/32 in Wire Rope Dia, 15 ft Length, 1-1/2 in Eye
- Dyna-Tite cable locks are sold 100 to a carton
- Wire rope is supplied in spools
- The maximum load range for each size incorporates a design safety factor of 5:1
- The cable lock and wire rope combination should be sized for the job so that the projected load falls within the appropriate working load limit (WLL)
- Hanging at angles will reduce the safe working loads
- For use with CL12-WC3 cable lock