| Eye Size | : | 3 in |
| Length | : | 15 ft |
| Wire Rope Diameter | : | 1/8 in |
The Looped Cable Assembly enhances the Dyna-Tite suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the jobsite. The remaining wire rope "drop" is passed through a channel in the Dyna-Tite Cable Lock. Then, the wire rope is either wrapped around the ductwork or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the ductwork in place. To ensure maximum safety, use only looped wire rope supplied by Duro Dyne with Dyna-Tite cable locks.
Duro Dyne® Dyna-Tite® Looped Cable Assembly, 1/8 in Wire Rope Dia, 15 ft Length, 3 in Eye
- Safe working loads are based on a 5:1 safety factor
- Hanging at angles will reduce the safe working loads
- For use with CL18-WC4 cable lock