| Finish | : | Galvanized |
| Height | : | 4 in |
| Latch | : | Hinged |
| Material | : | Steel |
| Series | : | DADC |
| Shape | : | Square |
| Type | : | Insulated |
| Width | : | 4 in |
The DAD Door has been designed to create an airtight seal utilizing a moisture, oil and grease resistant neoprene gasketing between the door to the frame and the frame to the duct. The door panel is constructed out of 24 ga galvanized steel and is filled with a 1 in 1-1/2 lb. fiberglass insulation (K factor 0.26+0.03@75°F). The frame is 24 ga galvanized steel with punched steel tabs along each side, which locks the frame into the ductwork. Smaller frame corner tabs make installation easy. Double camlock latches are used on doors 14 in and larger. 12 in and smaller have one camlock. Special sizes can be fabricated with multiple walls of steel or see-through panels or Cam-Lock only style.
Duro Dyne®, 006130, Tab Style Access Door, Insulated, Series: DADC, Square Shape, 4 in Width, 4 in Height, Hinged Latch, Steel, Galvanized
- Standard Sizes, Installation Note, All holes should be cut 1-1/8 in smaller than the door
- Latches, Single Camlock action on all hinged doors 12 in square and under
- Dual latches on larger hinged sizes
- Latches constructed of zinc plated cold rolled steel
- Integral frame with no open corners
- Nesting door design eliminates compression and minimizes air leakage
