| Color | : | White |
| Current/Amps | : | 0.3 A |
| Domestic/Import | : | Import |
| Duct Diameter | : | 4 in |
| Flow Rate | : | 80 cfm |
| Frequency Rating | : | 60 Hz |
| Grille Length | : | 13 in |
| Grille Material | : | Polymer |
| Grille Width | : | 14 in |
| Housing Height | : | 4 in |
| Housing Length | : | 10-1/2 in |
| Housing Material | : | Galvanized Steel |
| Housing Width | : | 11-3/8 in |
| Humidity Sensing | : | No |
| Motion Sensing | : | No |
| Mounting Type | : | Ceiling |
| Sones | : | 1.1 |
| Type | : | Low Profile |
| Voltage Rating | : | 120 VAC |
| Wattage Consumption | : | 25.7 W |
Designed for installations where conventional ventilation simply won't fit. Where multi-family applications require it, the LoProfile™ fan is narrow enough to be installed in a wall between 2 x 4 studs. When plumbing or electrical obstructions are found behind the drywall in ceiling remodel applications, the LoProfile™ fan can still fit without having to move anything. And that means most any room with space constraints can have powerful, quiet efficient ventilation.
NuTone® Bathroom Ventilation Fan, Low Profile, 80 cfm, 4 in Duct Dia, 120 VAC, 0.3 A, 60 Hz, 25.7 W, 1.1 Sones, 13 in Grille Length, 14 in Grille Width, Polymer Grille, 10-1/2 in Housing Length, 11-3/8 in Housing Width, 4 in Housing Height, Galvanized Steel Housing, Ceiling Mount, Humidity Sensing: No, Motion Sensing: No, White, Import
- Plug-in, permanently lubricated motor engineered for continuous operation
- Dynamically balanced centrifugal blower wheel for quiet, efficient performance
- Low rpm for quiet operation blower
- Rugged construction
- Metal, 4 in oval duct connector with no metallic clatter
- 4 in height allows for 2 x 4 in wall or ceiling installation
- Sturdy, easy, mounting directly to stud or joist
- Can be mounted in flat ceilings, sloped ceilings upto 12/12 pitch and walls
- Innovative design - the result of extensive research with designers and consumers
- Fan shall have corrosion resistant galvanized steel housing, it shall be ducted to a roof or wall cap using 4 or 3 in round ductwork
- Blower assembly shall be removable, have a centrifugal type blower wheel and a permanently lubricated motor designed for continuous operation
- 80 cfm with 4 in duct ensures ample air movement
- Compatible with radiation damper RDF1 which helps prevent flame and heat from spreading to other areas in multi-level buildings
- >50 cfm at 1/4 in static pressure meets ASHRAE 62.2 local ventilation requirements (with 4 in oval duct or 3 in round duct)